Countertop Contractor near Bergeron Rodeo Grounds
Countertop contractor near Bergeron Rodeo Grounds in Davie is work that starts with a tape measure rather than a price. The blocks around the rodeo grounds are the oldest part of town and they were not built in one wave, so the counter run behind the front door is not the same length from house to house. That length is most of the number.
- Warranty
- 2 years
- License
- CGC1524886

- Licensed & insured: CGC1524886
- 500+ kitchens completed
- 2-year workmanship warranty
- Answered 7 AM–10 PM, 7 days
A countertop contractor near Bergeron Rodeo Grounds is working in the oldest part of Davie, and the first thing that changes here is how much can be settled over the phone. The streets around the corner of Davie Road and Orange Drive are the original core of the town, and they did not go up in one stretch. Two houses on the same block can be fifty years apart, with different cabinet depths, different sink positions and a different length of counter behind the same front door. On most items in a kitchen that is a curiosity. On a counter it is the price.

There Is No Typical Kitchen on These Blocks
Most of Davie went up in a few big waves, and it shows in the housing numbers. This part of town did not. The census tract that holds the rodeo grounds contains 2,017 housing units, and the American Community Survey shows those houses spread across eight separate decades. The 1970s are the largest single group at 655 houses, which is still under a third of the tract. The 1980s account for 501, the 1990s for 435, and the 1960s for 215. Another 52 date to the 1940s, which is the old center of the town and something no other part of Davie has. No decade owns these blocks.
That matters to us more than it would to almost any other trade in a kitchen, because a countertop is the one piece priced almost directly off how long it is. The run is the total feet of counter measured along each wall, and the price we publish is quoted against a kitchen of roughly thirty linear feet. That figure is an assumption, not a measurement of your house. It holds up in subdivisions that were platted at one time and built to one plan, where every house on the street received the same kitchen.
On these streets it is not a safe assumption, it is a guess. A house near the town center from the 1940s and a house four blocks over from the 1990s are not the same kitchen, and neither one is obliged to land on thirty feet. Some runs are shorter than that. Some are longer than they look, because the kitchen was extended at some point and the run changes depth partway along, with a filler strip where the two eras meet.
So the order of the work is different here. We measure and then we quote, instead of quoting and then discovering. The measurement is one visit and it settles two things at once, because the length of the run also decides how many joints the finished counter needs and where they land. A short straight wall may need none at all. A long run that turns a corner needs at least one, and there is a good place for it and a bad one.


Why the Number Starts With Measuring the Run
A countertop replacement here runs $4,500 to $7,500 for a kitchen of about thirty linear feet, and it is the same figure in every city we work in, with nothing added for your address. What the range buys is the whole counter: template, fabrication, removal and disposal of the old top, installation, the sink cutout and the joints. Taking the faucet and drain apart and setting the sink back afterward is inside that number rather than a charge that appears on installation day.
If your run is well short of thirty feet or well past it, the measurement is what tells us where inside the range you sit and whether what you need is a straight replacement at all. It is also why we will not price a kitchen on this side of town from a photograph.
Where the joints go is not a matter of taste, either ours or the fabricator's. The Natural Stone Institute keeps written installation standards for countertop fabricators covering seam placement, joint widths, tolerances and overhangs, published in its Dimension Stone Design Manual. You get told where your seam is going before the stone is cut, not after it is set.
Total time is two to three weeks from the day the template is taken, because the slab is cut to your measurements rather than pulled off a rack. Time inside your house is one to two days. The two numbers stay far apart on purpose: nothing leaves your kitchen until the new counter is finished and loaded, so you keep the counter you have through the whole fabrication wait.
On an older house there is one more step, and we do it during the installation rather than find out about it halfway through. Stone is heavy and it has no give, so the run has to be level before anything is set on it. Where the boxes need shimming to carry the new top, that is inside the scope and inside the estimate.

How to Reach Us from Old Davie
From the corner of Davie Road and Orange Drive, take Davie Road south to Griffin Road and turn east. Griffin runs straight across Davie from one side of town to the other and ends at State Road 7. We are on State Road 7 just north of that intersection, at 4491 South State Road 7, suite PH19. Two roads gets you here, which makes it an easy one to talk somebody through on the phone. There is no need to come to us to start, though. The first visit is the measurement at your house rather than an appointment in a showroom, and it is the visit the number comes from. Somebody answers the phone from 7 AM to 10 PM, seven days a week.

Kitchen Remodeler Davie
4491 S State Road 7, Ste PH19, Davie, FL 33314
Every day, 7:00 AM – 10:00 PM
Licensed, Insured, and Permitted in Davie
A countertop replacement in Davie usually stays clear of permitting, as long as the sink stays where it is and nothing has to be rerouted to reach it. Once the sink moves, it stops being a surface swap. The town runs plumbing as a discipline of its own and publishes its plumbing forms and checklists separately from the rest of the building process, which is a fair clue about where that line sits. We identify and price any required permitting before the project is approved, rather than adding it once the slab is already cut. The work is contracted and invoiced by Gaven Constructions under Florida license CGC1524886, and installation labor carries a two year workmanship warranty from that same company.
- License
- CGC1524886 Certified General Contractor, verifiable in the Florida DBPR licensee search.
- Insurance
- Insured and bonded Certificates are available before any work is scheduled.
- Workmanship warranty
- 2 years On installation labor. Most of this market publishes one.
- Permits and design
- Priced before approval Requirements vary by project scope. Any required permitting, drawings, engineering, or design services are identified and priced before the project is approved.
- Who contracts the work
- Gaven Constructions Kitchen Remodeler Davie was acquired by Gaven Constructions, a licensed contractor since 2015. Every estimate and invoice is issued in that name, which is what puts the license behind the job.
Common Questions
How much does a new countertop cost near Bergeron Rodeo Grounds in Davie?
$4,500 to $7,500 for a kitchen of about thirty linear feet, and the figure does not change with the neighborhood. It is the complete counter: template, fabrication, taking the old top out and away, installation, the sink cutout and the joints. Where this part of town differs is not the price but how it gets confirmed. We take the measurement first, because the counter is the item that follows the length of the run most closely.
Why do you measure before quoting a countertop in old Davie?
Because the housing here does not agree on a size. The census tract around the rodeo grounds holds houses from eight different decades, so the kitchen next door is not evidence about yours. A quote given over the phone in a neighborhood like this is a quote given against somebody else's kitchen. The visit takes one appointment, it happens at your house, and after it the number is real rather than provisional.
Where will the seam be on my Davie countertop?
That depends on the length of the run and on how many corners it turns, which is one more reason the measurement comes first. A short straight wall can often be done in one piece. Longer runs and corners need a joint, and there are better and worse places to put it in terms of both strength and what you look at every day. You will hear where yours is going while the slab is still whole.
How long will my Davie kitchen be without a counter?
One to two days, which is the part that happens inside your house. The whole job is two to three weeks counted from the template, and the difference between the two is fabrication time that you spend with your existing counter still in place. We do not template and demolish on the same visit, and nothing is removed until the replacement is cut, finished and on the truck.
Can you replace the counter without replacing the cabinets in an older Davie kitchen?
Yes, and it is a real project rather than half of a bigger one. The condition is that the boxes are sound and level enough to carry the new material, which weighs considerably more than the laminate it usually replaces and will not flex to follow a wave. We check that at the walkthrough and again at the template. If the run needs shimming we correct it during installation. If the sink base has gone soft underneath, we say so then rather than after the slab is cut, because a new top over a failed box moves the problem instead of fixing it.
Recent Kitchen Remodeling Projects in Davie
Do you know how long your counter run is?
Measure along each wall in feet, add the island if you have one, and send it with a photo of the kitchen. That is enough for us to tell you what is realistic before anybody books a template.
Call (786) 780-2728






